DMU 60 eVo (linear) (Reference-Nr. 040840)

•  
  參考 040840

  制造年度 2023

  运行小时数 不适用

• 供应商

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• 主要类别

  金属加工机床

• 类别

  加工中心

• 机器类型

  加工中心（通用）

• 制造商

  DMG MORI

• 控制权

  Heidenhain

• 描述

  
  

  Working area 1
  Longitudinal	600 mm
  Cross	500 mm
  Vertical	500 mm
  General
  Universal machining centre; Control: CELOS with Heidenhain TNC 640
  Technical Data
  Feed rate longitudinal/transverse/vertical	50000/50000/50000 mm/min
  Rapid traverse longitudinal/transverse/vertical	50/50/50 m/min
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	120
  Max. tool weight	6 Kg
  Max. tool length	300 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	130 mm

• 規格

  
  

  Die and Mold Package linear incl. B-/C-Torque	Die and Mold Package linear incl. B-/C-Torque Dynamic package V-type Eagle timing belt for Z axis Torque table B-/C-axis including ATC AVD - Heidenhain or MVC - Heidenhain (starting NC 340590 11) APC and Top Speed - Siemens High End cooling unit for machi
  Spindle speed 20.000 rpm, HSK-A63	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Chain-type tool magazine 120 pockets	Tool magazine with 120 positions, chain type with double gripper (differently from standard)
  Pneumatic set up station for tool loading	Pneumatic set up station for tool loading
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Reduced table plate swivel rotary table	Reduced table plate for swivel rotary table Clamping surface D 505mm / 19.8 in
  Version Rotary joint, torque table	Rotary joint version 6 channels for Torque table 3 channel hydraulic,3 channel pneumatic media connection in the middle of the table
  Preparation 3D Quickset	Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
  Infrared measuring probe TS460	Infrared touch probe make Heidenhain TS 460
  Tool breakage control mechanical	Tool breakage control mechanical version Touch when changing into the magazine checkable tool length 60 to 300 mm
  Signal lamp 4-colour	Signal lamp, 4 colours
  Internal coolant supply 40 bar / 600l	Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon air purge for linear measuring system, bed flushing double cartridge filter 50µm for internal coolant
  Extended swarf flushing	Extended swarf flushing Additional flushing of the working area door left hand side, y axis and right cabin wall volume of the flushing adjustable manual (only in combination with internal coolant)
  Double cartridge filter,25 µm	Double cartridge filter, Finesse of filtration 25 µm (only in combination with internal coolant)
  Oil and emulsion mist separator	Oil and emulsion mist separator mechanical filter system 1100 m³/h
  SCHUNK Automation Interface PH 150 / PH CELL	Automation interface PH 150 / PH CELL for SCHUNK zero point clamping system consisting of: Interface (Profibus) via M65 Working table with 4-channel rotary joint Automatic loading door Control of SCHUNK NSE VERO-S Zero-point clamping system Communication
  Air blast through spindle centre	Air blast through spindle centre selection with M function maintained air (1 Drop Oil per 8min) (in combination with ICS possible)
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Special equipment	Adaptation of torque table rotary feed-through for direct mounting of a pneumatic basic chuck / zero-point clamping system (Rotary feed-through is included in S-G3385 or included in automation preparation). Reduction to 4 channels, connecting plate with p

• 国家

  二手