DMU 40 (Reference-Nr. 040784)

•  
  參考 040784

  制造年度 2022

  运行小时数 不适用

• 供应商

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• 主要类别

  金属加工机床

• 类别

  加工中心

• 机器类型

  加工中心（通用）

• 制造商

  DMG MORI

• 控制权

  Siemens

• 描述

  
  

  General
  Universal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	550 mm
  Cross	450 mm
  Vertical	420 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	30000/30000/30000 mm/min
  Rapid traverse longitudinal/transverse/vertical	30/30/30 m/min

• 規格

  
  

  Integrated motor spindle speedMASTER®	Drive power (100% DC) 25 kW
  	Drive power (40% DC) 35 kW
  	Torque (100% DC) 86 Nm
  	Torque (40% DC) 130 Nm
  	Speed range - 20000 rpm
  Toolchanger with set up station for tool loading	Number of tools 60
  	Clamping System HSK-A 63
  	Spindle taper HSK63-A
  NC swivel rotary table	Swivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation
  Tool clamping for HSK-A63	Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)
  Tool magazine 60 pockets	Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading
  Chip removal package - Aluminium	Swarf removal package aluminium Coolant - air-blast changeover Swarf conveyor scraper type, with wedge wire screen and suction pump Spray gun for swarf removal Bed flushing, cabin roof Chip flushing for working area
  Infrared measuring probe TS460	Infrared touch probe make Heidenhain TS 460
  Laser tool measuring BLUM DIGILOG	Laser tool measuring Blum DIGILOG fix mounted at machine column modified construction, note interference contour! Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper
  Preparation 3D Quickset	Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Signal lamp 4-colour	Signal lamp, 4 colours
  Mechanical Preparation Oil-mist separator	Mechanical preparation for connection of an oil mist separator on customer side opening in cabin ø 200mm
  Internal coolant supply 40bar/600l	Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. rotary joint in spindle, double cartridge filter 50µm for internal coolant Rotating clear-view window (differently from standard)
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air
  ATC (Application Tuning Cycle)	ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  IoTconnector	IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice)
  Machine Data Connector	Machine Data Connector (MDC) Uniform machine data interface.
  NETservice	NETservice Qualified support by Internet-based remote diagnostics
  Messenger V4	Messenger V4 Clear presentation of the machine live status.
  Service Agent	Service Agent Overview of all maintenance work on the machine
  3D data model	3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement)

• 国家

  二手