CTX beta 800 TC (Reference-Nr. 071683)

•  
  參考 071683

  制造年度 2019

  运行小时数 不适用

• 供应商

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• 主要类别

  金属加工机床

• 类别

  加工中心

• 机器类型

  加工中心（通用）

• 制造商

  DMG MORI

• 控制权

  Siemens

• 描述

  
  

  General
  - Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate
  Working area
  Swing diameter over guide ways	500 mm
  Turning diameter	500 mm
  Max. Turning Length	800 mm
  Bar diameter max.	65 mm
  Work spindle (left)
  Spindle nose	Flat flange
  Diametre of spindle nose	170h5 mm
  Spindle bore	87 mm
  Spindle diametre on front bearing	130 mm
  Main drive 1
  Drive power (100% DC)	25 kW
  Drive power (40% DC)	32 kW
  Speed range	- 5000 rpm
  Torque (100% DC)	280 Nm
  Max. torque (40% DC)	360 Nm
  C-Axis Speed	-5000 rpm
  Torque of C-Axis (holding torque)	280 Nm
  Turning-milling spindle
  Spindle taper	HSK-A 63 DIN 69893
  Spindle speed	-12000 rpm
  Drive power (100% DC)	19 kW
  Drive power (40% DC)	22 kW
  Torque (100% DC)	85 Nm
  Torque (40% DC)	100 Nm
  locking moment	1000 Nm
  Floor space/Weight
  Dimensions (L x W x H)	4,78 x 2,2 x 2,02 m
  Weight approx.	10000 Kg

• 規格

  
  

  Excentric turning and milling operation	Excentric turning and milling operation (only with Siemens control)
  5-axis simultaneus machining	5-axis simultaneous machining
  Interpolation turning	Turning-recessing cycle Manufacture of simple sealing Surfaces and grooves using turn/mill centers
  Counter spindle centre	Complete machining of shaft components without process interruptions on turn/mill centers with counter spindle. Cycle for automatic exchange of a center into the counter spindle and back into the tool magazine. The centre is not included in the delivery
  Technologie cycle alternating speed	Technology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)
  Polygon Turning	Polygon Turning for machining of elliptic and polygonal shapes on end faces Note: Only in combination with option B-A0326 Excentric turning and milling operation
  Program state control	With the program state control of the part state is retained on the control and / or influenced. Particularly suitable for multi-channel machines.
  Tool sort cykle	Order of the tools in the chain magazine according to the respective call in editing program. Time-optimized sort in chain magazine by using the shuttle instead of the spindle. No relocation of multitools.
  Multi-thread cycle 2.0	Multi-thread cycle 2.0 Cycle to create position orientated threads with free contours, pitches and free number of threads, e.g. for big transmission or special threads. Targeted overlapping of threads with cross-holes, e.g. redirection systems with ball
  gearSKIVING 2.0	Technology cycle for machining of straight, helical or convex (convex only for external gears) internal or external gears with conical shaped skiving tools up to module 4 (CTX TC / TC 4A) module 2 (CTV DF)
  Broaching	Technology cycle with dialog-guided programming for the production of any keyways according to DIN6885 or driving grooves according to DIN138 with standard tools. This option contains the technology cycle with the corresponding input mask.
  Y-Axis Parting	Technology cycle to parting off the workpiece by the Y-axis to achieve significantly higher feed, more process stability and less material loss. This option contains the technology cycle with the corresponding input mask to simplify the operation and
  3D quickSET (with toolkit)	3D QuickSET for turn-mill machines - Toolkit (consisting of magnetic foot holder with measuring ball and dial gauge) - For review and correction of the kinematic accuracy of conventional turning and 5-axis simultaneous machining - Requires 5-
  ATC	Application Tuning Cycle ATC - Demand-oriented adjustment of axis dynamics for machining tasks: accuracy (contour accuracy) / surface (smoothing) / speed (high dynamics) - Beneficial for turning-milling operations (2+1 / 3+2 / 5-axis simultaneous)
  Chuck rinsing device, mainspindle	Chuck rinsing device for main spindle, outside
  Chuck rinsing device, subspindle	Chuck rinsing device for subspindle, outside
  Tailstock function for counter spindle	Tailstock function for the counter spindle, mechatronic control of the supporting force, selectable per program Thrust force 250-600 daN, CTX beta / CTX beta TC. Thrust force 250-1200 daN, CTX gamma TC
  Counter spindle ISM 52	Counter spindle as integrated spindle motor ISM 52 (instead of tailstock) - drive power (100%-40%ED) 20/27 KW (26.8/36.2 hp) - partial hollow clamping (hydraulic) - draw tube ID 52 mm - C axis and spindle brake (hydraulic) - basic slide (Z3), AC s
  Hinged type chip conveyor	Hinged typ chip conveyor incl. coolant tank and coolant pump, 6 bar (87 psi)/20 litre/min
  BFU 8/20 bar, 600 l	Compact coolant system, consisting of: - coolant tank, 600 litre/158.5 gal - 8 bar/20 litre/min (CTX gamma TC 2nd: 8 bar/80 l/min /116 psi/ 21.1 gal/min) and 20 bar/25 litre/min (theoretical pump performance) (116.psi/5.2 gal/min and 290 psi/6
  Chain magazine for 48 tools HSK-A 63	Tool magazine, 48-fold chain magazine with double gripper with cam drive instead of tool disc magazine, tool reception HSK-63A DIN 69893. only with Siemens control. Surcharge
  Automatic actuation of sliding cover, electrical	Automatic actuation of sliding cover, electrical. (Remark: option B-L7250, automatic loading hatch is not possible)
  Workpiece touch probe TC60, BLUM	Workpiece touch probe TC60, BLUM with cycle package Quickstart Interchangeable in turning/milling spindle incl. an sending and receiving unit and one probe tip
  Protection Package	Protection Package consisting of: - MPC 1.0 - Macine Protection Control - Easy Tool Monitor 2.0
  Electrical interface for Robo2Go	Electrical interface standard Profibus for Robo2Go (Only at Siemens control) Incl. - Additional compressed air supply - Additional Ethernet interface - Power supply of the robot by the machine - User interface integrated into CELOS (with CELOS 3 as
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state

• 国家

  二手