TECHNIKA ZSM 5100-2000

•  
  參考 1049-751968

  制造年度 1975

  运行小时数 不适用

• 供应商

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Germany

  

• 主要类别

  金属加工机床

• 类别

  钻孔机

• 机器类型

  中心演练

• 制造商

  TECHNIKA

• 技术数据

  workpiece diameter

  125 mm

  grinding depth

  50 mm

  clamping length

  2000 mm

  total power requirement

  0,5 kW

  weight of the machine ca.

  1000 kg

  dimensions of the machine ca.

  m

• 描述

  T E C H N I C A (Switzerland)
  Centre Hole Grinding Machine
  Model ZSM 5100 – 2.000
  Year approx.. 1975 S/N 66 32 7872 – J 3278
  _______________________________________________________
  
  Distance between centres 50 – 2.000 mm
  Height of centres approx. 125 mm
  Workpiece Ø in clamping Vice 8 – 125 mm
  Swing of workpiece over tailstockguide 290 mm
  Swing of Workpiece max. over grinding head pillar 300 mm
  Max.weight of workpiece 250 kg
  
  Max. centre hole taper Ø 2 – 50 mm
  Max. centre hole taper angle 60 °
  
  Clamping range of vice approx. 5 – 160 mm
  
  Grinding head adjustable in vertical axis 160 mm
  Stroke of grinding tool on workpiece 0.75 – 5 mm
  
  Grinding tool Ø 15 – 60 mm
  Grinding spindle speeds 13,000 – 45,000 rpm
  
  Total electrical load, approx. 1 kW - 380 V - 50 Hz
  Weight, approx. 1.000 kg
  
  Accessories / Special Features
  Machine is suitable for workpiece length up to 2.000 mm
  with a basement extension
  * A cone shaped grinding wheel is employed, but it is only in line contact
  with the centrehole surface, in addition it is reciprocating
  simultaneously along this line.
  The workpiece remains stationary, enabling the generation of perfect
  centre holes.
  * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice
  which gives three point contact and always coincides with the center of
  the grinding spindle.
  * Height-adjustable workpiece centering vice with carbide inserts.
  Manual adjustment of appropriate workpiece diameter with clamping screw.
  * Dressing device, mounted on the side of the grinding spindle, stroke
  approx. 40 mm, for producing a geometrically exact conical form and with
  oscillation of diamond tool.
  * Pre-centering device for Workpiece adjustment between centers.
  * Pneumatic Oil Lubrification of grinding spindle by oil-mist.
  * Manually adjustable Tailstock with handwheel but without motorized drive.
  
  Condition : Good to very good. Machine can be inspected under power.
  Delivery : Ex stock, as inspected
  Payment : Net, after conclusion of contract
  
  
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• 国家

  二手